Game Composites GB1 GameBird, Maintenance Manual

Page: 22 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
5-9
Item
Reference
Initials
Canopy
Lock function and visually check condition of parts and fasteners 52-05
Visually check canopy glass condition 52-01
Check freedom of movement, opening and closing canopy 52
Visually check retaining strap installation and condition 5-06
Visually check Hinge installation, condition 52-04
Visually check canopy frame condition 5-06
Rudder pedals, adjusters and slider assemblies, front and rear, left and right
Brake function for “hard pedals” 12-10
Connection of brake lines 12-10
Unscrew cap of brake fluid reservoir, lift rubber diaphragm, visually check
brake fluid levels (right and left aft pedal assemblies). When required add fluid.
When complete, put rubber diaphragm back in place and screw cap on tight.
12-10
Check freedom of motion from stop to stop
Clean, and visually check condition of rails
Check condition of roller protectors for contact with the rails (sweepers in
contact with rails, ensure functionality) 5-06
27-16
Check function of pedal adjusters over entire range, check for play of rollers on
rail
27-18
27-29
Check installation and spring force of locating pin: compare right and left for
obvious degradation in spring force 27-18
27-29
Visually check condition of pedal assembly and respective fasteners 5-06
Visually check cotter pins in master brake cylinder attachment
27-17
27-28
Check freedom of motion of pedal and master brake cylinder when actuating
brake
Check overall condition of rudder pedal assembly 27-28
All fasteners secured (check cotter pin or torque seal condition)
27-17
27-28
Cockpit mounted rudder bellcrank assemblies
Check freedom of motion over entire range of movement, check for play in
bearings
27-23
Visually check cotter pins through castle nuts
27-22 FWD
27-23 CTR
27-26 AFT
Check torsional freedom of movement for rod ends
27-20
27-21
27-24
27-25
Visually check composite structure around mounting bracket for damage
51-01,
27-20
Check condition and security of rubber stops (one at each front bellcrank) 27-19
Rudder rods and cables
Check freedom of motion from stop to stop