Game Composites GB1 GameBird, Maintenance Manual

Page: 185 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
39-4
Front Instrument Panel GB1-3920-00-00
The front instrument panel is a painted glass fiber structure, providing space the front instruments and
shielding some of the front seat rudder control- and avionic components.
The entire unit, including installed instruments, can be removed for maintenance purposes or operation with
the optional single seat canopy.
1 MFD with attitude, structural temperature, CO and Accelerometer Garmin GDU 450
2 Airspeed Indicator United 8030B.168
3 Entry Speed placard GB1-1130-00-09
4 Engine Control Quadrant GB1-7613-00-00
5 Altimeter United 5934PD-3
6 Headset sockets
To service the front instrument panel:
1. Remove front instrument panel fasteners
2. Pull instrument panel approximately 10 cm / 4 in backwards, providing sufficient room to reach the
connectors on the back
3. Unscrew MFD2 connector fasteners, pull off connector
4. Disconnect pitot and static quick disconnectors
5. Remove instrument panel
NOTE: Quick disconnects with shut-off function, does not affect MFD1.
Leak check after configuration change not required.
Color code: RED = PITOT; GREEN = STATIC
6. Conduct service as required. For inspection or repair of composite structures refer to chapter 51 .
7. Reinstall reversing steps 1 – 5
Signature
NOTE: If any of the pitot-static lines have been disconnected by any other means than the quick
disconnect valves (instrument maintenance for example), a pitot-static test per section
31-05 must be conducted.