If no means are provided on the child safety seat
for securing the seat belt, please install a locking
clip on the seat belt.
–
After the above steps 1 and 2, pull up the
shoulder belt and make sure the lap belt is
tensioned.
–
Firmly grasp the seat belt near the locking
tab. Pinch the two parts of the seat belt
together so that they do not slip out of the
locking tab. Unbuckle the seat belt.
Install the locking clip as shown. Place the buckle
as close as possible to the locking tab and insert
the locking tab into the locking clip. Go to steps 6
and 7.
Installing LATCH or ISOFIX system
The rear seats of this car are equipped with the
LATCH system, and thus suitable for the LATCH
or ISOFIX system child safety seats. Below are
mainly the installation instructions of the LATCH
system child safety seat.
WARNING
•
The child safety seat anchorages
installed in this car can be used to fix
the child safety seats only.
•
Do not connect straps, hard and sharp
objects or any other objects other than
child safety seats to the anchorages;
otherwise children may be endangered
in the event of an accident.
The lower anchorage
①
of the rear seat is hidden
in the gap between the seat back and the seat
cushion; the upper anchorage
②
is directly
behind the rear seat head restraint and can be
seen by opening the trim cover.
Locking clip
3. Instructions for Safe Operation
30
