Activation of automatic turning down of exterior
rearview mirror when reversing
– Enter the AV system to activate the
"Automatic Angle Adjustment of Exterior
rearview Mirror" function.
– Switch the engine start/stop button to the
"ON" position, depress the brake pedal and
shift the gear to "R" position.
– The exterior rearview mirrors on both sides
are automatically turned down to the memory
positions.
NOTE
• If the gear is shifted from the "R" position to
other positions for more than 10 s, or the
car speed exceeds 10 km/h, or the
selection button is restored to its original
state, the mirror will automatically return to
the previous position.
• The manual turning down of exterior
rearview mirror when reversing is affected
by the selection of “L” or “R”, but the
automatic turning down of exterior rearview
mirror when reversing is not affected by it.
Defrosting and defogging function*
– If the button
is pressed, the button
indicator lamp will come on, and the
defrosting and defogging function will be
activated to clear the fog or frost on the
exterior rearview mirrors and the rear
windshield glass.
– This function will be deactivated automatically
after about 15 minutes or pressing the button
again can manually deactivate this function;
when this function is deactivated, the button
indicator lamp will go out.
NOTE
• If there is residual fog or frost after the
defrosting and defogging function is
deactivated automatically, just press the
button
again.
• Do not use the defrosting and defogging
function for a long time, otherwise the
heater may be damaged due to
overheating.
• If the defrosting and defogging function is
out of use, please deactivate it to avoid
wasting battery power.
82
4. Operation of Systems and Equipment
