–
Wipe off the oil on the dipstick using a clean
cloth, and then insert the dipstick completely.
–
Pull out the dipstick again and read the
measured oil level, which shall be between
the lower limit mark “L” and the upper limit
mark “H”.
–
If there is too little engine oil, please add
engine oil in time. Otherwise, poor lubrication
will damage the engine.
Add oil
After checking the oil level, if required, add oil
following the steps below:
–
Lift up and remove the engine upper guard
plate
①
.
–
Unscrew the oil filler cap counterclockwise.
–
Add the engine oil in small quantities several
times, and check the oil level after each filling.
–
When the oil level is close to the upper limit
mark “H”, indicating the engine oil is sufficient,
stop adding oil, refit the oil filler cap and
tighten it clockwise.
187
6. In-service Maintenance
