The Shift by Wire and in-line bistable
gear arrangement are used in the
transmission system. In the first stable
state, the “R”, “N” and “D” positions can
be engaged, and in the second stable
state, the “S” and “M+/M-” positions.
“P” position and “ECO” mode are
engaged using buttons. When the
engine start/stop button is in “ON”
position, after a gear change, the
instrument cluster displays the
information on corresponding gear.
WARNING
The “R” or “P” position can be
engaged only when the car is
completely stationary, otherwise
the transmission will be damaged.
This position can be reached by pushing the gearshift lever to the left
from the D position: the second stable-state position
Manual gear change, push
up - upshift
The second stable-state
position
Manual gear change, push
up - downshift
The first stable-state position: R, N and D positions can be engaged
R position area:
According to the working conditions,
push the gearshift lever up to different
positions to engage the R position.
D position area:
According to the working conditions,
pull the gearshift lever down different
positions to engage the D position.
129
5. Driving Guide
