5.1 Starting and driving
5.1.1 Engine start/stop button
When the intelligent remote control key is detected
in the car, the engine start/stop button can be
operated to switch the power state.
When the “P” position is engaged and the brake
pedal depressed, the engine start/stop button
indicator lamp turns green. At this time, press the
engine start/stop button to start the engine.
When the brake pedal is not depressed, press the
engine start/stop button to switch the positions in
the following order: “OFF → ACC → ON → OFF”.
– OFF: The engine start/stop button indicator
lamp goes out.
– ACC: The engine start/stop button indicator
lamp turns orange, and the circuits of 12V
power supply and other accessories are
connected.
– ON: the engine start/stop button indicator
lamp turns orange and the circuits of all
electric equipment are connected.
NOTE
• When the engine start/stop button is
switched from “OFF” to “ACC” and remains
in “ACC” position for one hour, it will enter
the battery saver mode and automatically
return to “OFF” position.
Limphome mode
When “No key detected” appears on the
instrument cluster display due to low battery of the
intelligent remote control key, you can try to place
the key horizontally at the mark on the bottom of
the armrest box, and then press the engine
start/stop button to switch it to “ACC” or “ON”
position or depress the brake pedal, and after the
engine start/stop button indicator lamp turns
green, press the engine start/stop button to start
the engine.
This is an emergency start method. Please
replace the intelligent remote control key battery
as soon as possible.
125
5. Driving Guide
