Furuno FSV-85, Operator'S Manual

Page: 32 / 184

2. HORIZONTAL MODE
2-6
2. If necessary operate the TILT control to change center tilt angle.
In automatic tilt, “AUTO” is displayed at the top right corner. To disable automatic
tilt, select OFF at step 1.
Automatic tilt angle (narrow) with AUTO TILT key
Automatic tilt angle (wide) with AUTO TILT key
For example, when the RANGE control, TILT control and AUTO TILT key are set to
800 m, 8° and width (1) respectively, the tilt angle changes at each transmission as
follows: 8°
→
9°
→
8°
→
7°
→
8°.
Note 1: The AUTO TILT key is inoperative when the target lock function is active or
is made active. Auto tilt is available when the target lock is OFF.
Note 2: If the picture set with auto tilt is not visible, disable auto tilt and try again.
Range (m) Width 1 Width2 Width3 Period
60, 100
150, 200
300, 400
500, 600
700, 800
900, 1000
Over 1100 ±4°*;
±2°
±1°
±1°
±1°
±1°
±1° ±6°*
±4°
±2°
±2°
±2°
±2°
±2° ±8°*
±6°*
±4°*
±3°
±3°
±3°
±3° Period: One transmission
Note : Tilt angle changes in 2° in-
crements for asterisk-marked
width; 1° increments for all other
widths.
Range (m) Width 1 Width2 Width3 Period
60, 100, 150
200
300, 400
500, 600
700, 800
900, 1000
Over 1100 ±10°
±10°
±10°
±8°
±6°
±4°
±2° ±16°
±16°
±16°
±16°
±12°
±8°
±4° ±20°
±20°
±20°
±20°
±16°
±12°
±6° Period: One transmission
R 400m
AUTO
17
°
T
(21
°
)
G 10
N-UP
P 8
H
Current tilt angle
Auto tilt is active
Set tilt angle