Furuno FSV-85 Operator'S Manual Download

Page: 153 / 184

8. RECORD/RECALL OPERATION

8-3

How to display the latest still image

1. Push the right-click button on the numeric/graphic data display to show the pop-

up menu.

2. Select [Record/Recall] then push the left-click button.
3. Select [Recall Still Image] then push the left-click button.

The latest still image is shown on the display.

Note:

The window can be resized, and moved by drag and drop. Also, you can

zoom in/out with the scrollwheel.

4. Select [Quit] on the still image window then push the left-click button to close the

window.

Note:

The default function of the

key displays the recalled still image window.

How to display a still image from the file list

1. Push the right-click button on the numeric/graphic data display to show the pop-

up menu.

2. Select [Record/Recall] then push the left-click button.
3. Select [Still Image] then push the left-click button.
4. Select a file from the file list.
5. Select the play button (green triangle) on the window then push the left-click but-

ton to recall still image window. A maximum of eight windows can be shown on
the display.

6. Select [Quit] on the recalled still image window then push the left-click button to

close the window.

7. Select [Quit] on the still image window then push the left-click button to close the

window.

Summary of Contents for FSV-85

























































































































































































Search results

Summary of Contents for FSV-85

Reviews:

Related manuals for FSV-85

Brands by name

Popular brands

Furuno FSV-85, Operator'S Manual

Search results

Summary of Contents for FSV-85

Reviews:

Related manuals for FSV-85

Brands by name

Popular brands