Questions? Please Contact Your Local Manufacturer’s Representative
3-45
SECTION 3
Hydronic-PURE-Control-UserManual-211214
CONTROL MENUS
!
WARNING
All information in this addendum is
for reference and guidance purposes,
and does not substitute for required
professional training, conduct, and strict
adherence to applicable jurisdictional/
professional codes or regulations.
Follow all proper lockout/tagout
procedures for service. Before beginning
any service, ensure area is free of
combustible materials and other dangers.
In order to meet warranty conditions,
ensure all appropriate maintenance
activities are performed.
System Configuration
Allows the user to set system parameters as shown below and in the table that
follows.
Parameter
Name
Range
Units
Description
Date
N/A
Month/
DD/YYYY
Press on the Date for a calendar selection format.
Time
00:00 – 23:59
HH:MM
Press on the Clock for a 24hr time selection for
hours/minutes.
Local Ethernet /
IP Address
192.168.1.100 –
192.168.1.109
N/A
10 possible IP addresses for each boiler on the
Lead/Lag boiler network.
*See Section 5 for more information on assigning
IP addresses and configuring the Lead/Lag.
Save User
Defaults
N/A
N/A
Backup user settings to the Micro SD card. Settings
will be saved and can be restored at a later time.
Load User
Defaults
N/A
N/A
Restore User settings (requires previously saving
the user defaults).
Load Factory
Defaults
N/A
N/A
Loads the factory settings, effectively restoring the
controller to the state in which is shipped from the
factory.
Battery Icon
Battery OK
(green) /
Battery Dead
(red)
Green/Yellow/Red and message indicator for bat-
tery life remaining.
File Manager
N/A
N/A
Interface for moving files of the Control screen via
USB flash drive. Including Trending Data, Screen-
shots, Troubleshooting Snapshots, etc.
*Please see addendum 3 for more information on
moving files off of the Controller.
