26
SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Workaround: If the system fails to boot because of this problem, retry booting.
Ierrs
Are Generated When 100Mb/Full With
Forced Speed/Duplex Is Set in
e1000g.conf
(CR
6555486)
As a result of research, it turned out that this problem had never happened on the
condition which we informed before.
It is the case that this problem happens when e1000g sets Auto-negotiation:off and
its link partner sets Auto-negotiation:on, which is specified in IEEE802.3.
Therefore the same problem can be seen on the other drivers than e1000g when it
does the same setting.
The following setting is also available on e1000g driver.
■
Auto-negotiation : off
■
speed : 100Mbps
■
Duplex : Full
But we suggest Auto-negotiation be set to "on" because this problem frequently
occurs when users who set Auto-negotiation:off to e1000g forget to set Auto-
negotiation:off to link partner.
%PSTATE:16 AG:0 IE:1 PRIV:1 AM:0 PEF:1 RED:0 MM:0 TLE:0 CLE:0 MG:0 IG:0
%ASI:20 %CCR:8 XCC:nzvc ICC:Nzvc
%TL:2 %TT:3f %TPC:f024327c %TnPC:f0243280
%TSTATE:14414000400 %CWP:0
%PSTATE:4 AG:0 IE:0 PRIV:1 AM:0 PEF:0 RED:0 MM:0 TLE:0 CLE:0 MG:0 IG:0
%ASI:14 %CCR:44 XCC:nZvc ICC:nZvc
Normal GL=1
0: 0 0
1: f0200000 0
2: f0200000 0
3: fff78000 0
4: fec320fc 3ffe60000
5: f02833e4 3ffe60000
6: fee826c8 3ffe60600
7: fee817d8 f02432bc
%PC f0238978 %nPC f023897c
%TBA f0200000 %CCR 8200016 XCC:nzvC ICC:nZVc
{0} ok
