Chapter 3
Known Issues
49
The
ok
Prompt is Not Displayed After POST Ends
(CR 11215994)
In rare circumstances, the ok prompt may not be displayed normally after POST
execution ends.
Workaround: If this problem occurs, use the
showfaults -v
ALOM CMT
compatibility command to confirm the status of POST. When the
"Last POST
Run"
displays the date and time of the POST currently executed and
"POST
Status"
shows
"Passed all devices,"
this indicates that the POST completed
normally. Execute the
resetsc
ALOM CMT compatibility command, and then
execute the
poweroff
and
poweron
ALOM CMT compatibility commands, in this
order
.
After the Power Cord Removal/Insert, an Error
Message May Appear during the POST
After you remove/insert the power cord and while POST is running, the
“
/SYS/XXXXX prom is unreadable or corrupted
” message may appear and
stop at
ok
prompt.
Message example:
2008-04-29 17:10:35.407 0:0:0>........
2008-04-29 17:10:57.749 0:0:0>End : Block Mem Test
2008-04-29 17:10:57.757 0:0:0>INFO:
2008-04-29 17:10:57.766 0:0:0> POST Passed all devices.
2008-04-29 17:10:57.783 0:0:0>POST: Return to VBSC.
2008-04-29 17:10:57.795 0:0:0>Master set ACK for vbsc runpost
command and spin...
/
sc>
sc>
showfaults -v
Last POST Run: Tue Apr 29 17:10:58 2008
Post Status: Passed all devices
No failures found in System
sc>
Chassis | major: Host has been powered on
0:0:0>
0:0:0>SPARC-Enterprise[TM] T5120/T5220 POST 4.30.6 2009/12/01 13:08
