iRMC S2/S3
169
iRMC S2/S3 - Information, firmware and certificates
7.6.2
Save iRMC S2/S3 Firmware Settings -
Save firmware settings
The
Save iRMC S2/S3 Firmware Settings
page allows you to save the current
firmware settings and a number of other settings for the iRMC S2/S3 in a file.
Additionally, you can load the firmware settings onto the iRMC S2/S3 again.
–
The firmware settings selected under
Save iRMC S2/S3 Firmware settings in
ServerView® WinSCU XML format
are saved in a file with the name
iRMC_S2_settings.pre
or
iRMC_ S3_settings.pre
, respectively. In the Server
Configuration Manager (WinSCU), you can use the
Import...
button to load
the firmware settings onto the iRMC S2/S3 again.
–
The firmware settings selected under
Save iRMC S2/S3 Firmware settings in
binary (BMCCLONE.exe) format
are saved in a file with the name
iRMC_S2_settings.bin
or iRMC_ S3_settings.bin, respectively. You can use
the
Import iRMC S2/S3 Firmware settings in ServerView® WinSCU XML format
from file
group to load the firmware settings onto the iRMC S2/S3 again.
V
CAUTION!
Always save the setting using
Save iRMC S2/S3 Firmware settings in ServerView® WinSCU XML format
.
Save iRMC S2/S3 Firmware settings in binary (BMCCLONE.exe) format
should only be used if the system module of the managed server is being
replaced.
I
If you want to save the user settings
(Include User Settings
), you require
Configure User Accounts
permission. In all other cases,
Configure
iRMC S2/S3 settings
permission is sufficient.
Summary of Contents for Remote Management
