manualshive.com logo in svg

Fujitsu Remote Management, User Manual, Page: 151 / 426

Share
Download
Fujitsu Remote Management User Manual Download Page 151

iRMC S2/S3

 151

System Information - Information on the server

System FRU / IDPROM Information

Information on the FRUs (Field Replaceable Units) is listed under 

System FRU/IDPROM Information

. FRUs are system components that can be 

released and removed from the system. The 

CSS Component

 column indicates 

for each of the components whether the CSS (Customer Self Service) 
functionality is supported.

Figure 71: System Overview page - System FRU / IDPROM Information

Current Overall Power Consumption

I

This option is not supported for all PRIMERGY servers.

Figure 72: System Overview page - Current Overall Power Consumption

Under 

Current Overall Power Consumption

 you can see all the measurements 

current, minimum, maximum and average power consumption for the server in 
the current interval. 

A graphical display also shows the current power consumption of the server 
compared with the maximum possible power consumption. 

Summary of Contents for Remote Management











































































































































































































































































































































































































































Reviews:

No comments