manualshive.com logo in svg

Fujitsu Remote Management, User Manual

Share
Download
Fujitsu Remote Management User Manual Download Page 214

214

 

 iRMC 

S2/S3

Sensors - Check status of the sensors

Ê

Define the behavior in the event of a fault using the list at the bottom of the 
work area:

–

Choose 

continue

 if the server is not to be shut down if the selected fans 

fail.

–

Choose 

shutdown-and-power-off

 if the server is to be shut down and 

powered down if the selected fans fail. If you choose this option, you must 
also specify the time in seconds between failure of the fan and shutdown 
of the server (Shutdown Delay) in the field to the right of the list.

I

In the case of redundant fans, shutdown is only initiated if more 
than one fan is faulty and 

shutdown-and-power-off

 is also set for 

these fans.

Ê

Click 

Apply to the selected Fans

 to activate your settings for the selected fans.

Summary of Contents for Remote Management











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands