Fujitsu Remote Management User Manual Download Page 254

Page: 254 / 426

254

iRMC

S2/S3

Alerting - Configure alerting

7.13.1 SNMP Trap Alerting -

Configure SNMP trap alerting

The

SNMP Trap Alerting

page allows you to view and configure the settings for

SNMP trap alerting.

Forwarding of SNMP traps to up to seven SNMP servers is supported.

Figure 143: SNMP Trap Alerting page

SNMP Community

Name of the SNMP community.

Click

Apply

to accept the community name.

SNMP Server1 .. SNMP Server7

(trap destinations)

DNS names or IP addresses of the servers that belong to this community
and are to be configured as

Trap Destinations

Click

Apply

to activate the SNMP server as a trap destination.

Click

Test

to test the connection to the SNMP server.

Click

Apply All

to activate all the settings if appropriate.

Summary of Contents for Remote Management











































































































































































































































































































































































































































Search results

Summary of Contents for Remote Management

Reviews:

Related manuals for Remote Management

Brands by name

Popular brands

Fujitsu Remote Management, User Manual

Search results

Summary of Contents for Remote Management

Reviews:

Related manuals for Remote Management

Brands by name

Popular brands