Fujitsu Remote Management User Manual Download Page 162

Page: 162 / 426

162

iRMC

S2/S3

BIOS - Backing up/restore BIOS settings, flashing BIOS

BIOS Upload from File

The

BIOS Upload from File

group allows you to perform an online update of the

BIOS on the managed server. To do this, you must provide the current BIOS
image in a file.

Figure 80: BIOS Update Settings page - BIOS Update from File

Update file

File in which the BIOS image is stored.

UPC

-format file is required for performing the

BIOS Upload from

File

function.

Browse...

Opens a file browser that allows you to navigate to the update file.

Click

Apply

to activate your settings and to start flashing the BIOS.

CAUTION!

If a BIOS update is currently in progress, do not power-off or restart
the server.

Summary of Contents for Remote Management











































































































































































































































































































































































































































Search results

Summary of Contents for Remote Management

Reviews:

Related manuals for Remote Management

Brands by name

Popular brands

Fujitsu Remote Management, User Manual

Search results

Summary of Contents for Remote Management

Reviews:

Related manuals for Remote Management

Brands by name

Popular brands