Fujitsu Remote Management User Manual Download Page 369

Page: 369 / 426

iRMC S2/S3

369

Flash tools

<file1> through <file3>

Specify one or more files to determine which updates are to be made:
The following files are to be selected:

boot<FW-Version>.bin

Updates the bootloader firmware.

dcod<FW-Version>.bin

Updates the runtime firmware.

<SDR-Version>.SDR

Updates the SDR.

To update firmware image 2, you must also specify option

(see

below).

Updating firmware image 2.

/l [<logfile>]

Outputs error messages to the specified log file. If no logfile is specified,
the output is directed to the

flbmc.log

file.

No output on the console.
This option has priority over the

and

options.

/np A rotating bar is shown in place of the percentage completion during the

flashing operation.

Outputs additional debug information.

Emulation mode (for debugging purposes only).

Update the inactive firmware.

/h and /?

Outputs help information.

Summary of Contents for Remote Management











































































































































































































































































































































































































































Search results

Summary of Contents for Remote Management

Reviews:

Fujitsu Remote Management, User Manual, Page: 369 / 426

Search results

Summary of Contents for Remote Management

Reviews: