manualshive.com logo in svg

Fujitsu Remote Management, User Manual

Share
Download
Fujitsu Remote Management User Manual Download Page 172

172

 

 iRMC 

S2/S3

iRMC S2/S3 - Information, firmware and certificates

7.6.3

Certificate Upload - Load the DSA/RSA certificate 
and private DSA/RSA key

The 

Certificate Upload

 page allows you to load a signed X.509 DSA/RSA 

certificate (SSL) from a Certificate Authority (CA) and/or your private DSA/RSA 
key (SSH) onto the iRMC S2/S3. 

I

The iRMC S2/S3 is supplied with a predefined server certificate (default 
certificate). If you want to access the iRMC S2/S3 over secure SSL/SSH 
connections, it is recommended that you replace the certificate with one 
signed by a Certificate Authority (CA) as soon as possible.

I

Input format of the X.509 DSA/RSA certificate and the private DSA/RSA 
key:

The X.509 DSA/RSA certificate and the RSA/DSA must both be 
available in PEM-encoded format (ASCII/Base64). 

Summary of Contents for Remote Management











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands