Fujitsu PRIMERGY TX2550 M5, Upgrade And Maintenance Manual

Page: 587 / 636

18.4 Minimum startup configuration
Field Replaceable Units
(FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Component Notes
System board no TPM or expansion cards installed
1 CPU with CPU heat
sink installed in CPU slot CPU 1
1 memory module installed in DIMM slot 1A
Front panel module without connected USB3.0
1 PSU installed in PSU bay PSU 1
Table 5: Minimum startup configuration - components
Cable Notes
Front panel cable connected to the system board
Power cable
Table 6: Minimum startup configuration - cables
▶
"Shutting down the server" on page 49 .
▶
"Disconnecting the power cord" on page 50 .
▶
Take the system down to its minimum startup configuration.
▶
"Connecting the power cord" on page 82 .
▶
Connect a display to the server.
▶
Switch on the server, see "Switching on the server" on page 83 .
Appendix A
TX2550 M5 Upgrade and Maintenance Manual 587