Fujitsu primergy TX150 User Manual Download Page 54

Page: 54 / 305

Chapter 2 Checking before OS Installation

Click [OK].

The Windows installer starts and the setup window appears.

Click [Next].

The [License Agreement] window appears.

Select [I accept the license agreement] and click [Next].

The [User Information] window appears.

Enter the user information of the software and click [Next].

The [Destination Folder] window appears.

Specify the installation folder and click [Next]. To change the installation folder,
click [Browse] and select the folder.

For Windows 2000

The [Select Features] window appears.

For Windows XP

The [Ready to Install the Application] window appears. Go to Step8.

Summary of Contents for primergy TX150


















































































































































































































































































































Search results

Summary of Contents for primergy TX150

Reviews:

Related manuals for primergy TX150

Brands by name

Popular brands

Fujitsu primergy TX150, User Manual

Search results

Summary of Contents for primergy TX150

Reviews:

Related manuals for primergy TX150

Brands by name

Popular brands