Fujitsu primergy TX150, User Manual

Page: 210 / 305

210
Chapter 7 Installing Internal Options
6
Attach the removed 5-inch storage bay rails to the internal device to be added.
Of the eight screws removed from the dummy unit when the 5-inch storage bay rails were
detached, use four metric threads to install the internal device.
7
Install the internal device to the 5-inch storage bay.
8
Connect a SCSI cable to the 5-inch internal devices.
When adding one 5-inch internal device
Use the port A shown in the following cable illustration for SCSI cable connection.
When adding two 5-inch internal devices
When connecting a SCSI cable to the internal devices, use port A shown in the following cable
illustration for the internal device installed in Bay 3 and use port B for the internal device
installed in Bay 2.
9
Connect the power cable to the 5-inch internal devices.
Connect unused power cable to the internal devices to which the SCSI cable is connected.
10
Attach the front and side covers.
㪘 㪙
Terminal resistor Connects to SCSI card
Line of 1st pin