manualshive.com logo in svg

Fujitsu primergy TX150, User Manual

The Fujitsu Primergy TX150 user manual is an essential companion for users looking to maximize the potential of this powerful server. This comprehensive manual covers every aspect of setting up and utilizing the TX150, providing step-by-step instructions and troubleshooting tips. Download your free copy from manualshive.com today.

Share
Download
background image

250

Chapter 9  Operation and Maintenance

9.1 Daily Maintenance

This section explains how to check the status of the operating server, as well as how 
to perform daily maintenance.

9.1.1 Checking the Server Condition

■

Checking Each LED

This server is equipped with LEDs that display various hardware conditions.
Check the server status via each LED after starting the server. For positions and functions of each status 
LED, refer to "1.3 Component Names and Functions" (

J

Pg.23).

■

Server Monitoring Tool (ServerView)

ServerView is software that monitors whether the server hardware is in a normal state in order to protect 
important server resources. When using ServerView, the server hardware is monitored all the time. If an 
error that could cause trouble is detected, the administrator is notified in real-time which enables early 
detection. This allows the server administrator to remove a system error early and avoid trouble. 
For an overview and installation of ServerView and other high reliability tools, refer to "1.2.2 High 
Reliability Tools" (

J

Pg.20) and "Chapter 6 High Reliability Tools" (

J

Pg.175).

9.1.2 Cleaning

Clean the server regularly.

■

Cleaning the Server

Wipe with a soft, dry cloth. For stains that do not come off with a dry cloth, wipe with a cloth lightly 
dampened with a mild detergent. Once the stain has been removed, wipe off any remaining detergent 
with a cloth dampened with water. When wiping the server, be sure that no moisture enters the server 
machine. 
Do not use solvents. Use a mild detergent only. Otherwise, the server may be damaged. 
Use a vacuum cleaner periodically to prevent dust buildup in ventilation holes.

`

In dusty environments, dust piles up on the front and rear panels of the server over short periods. 
Install the server in a different location to avoid failures.

• Before cleaning, turn off the server and unplug the power cables from the

outlets. Also power off peripherals and disconnect them from the server. Failure
to do so may cause electric shock (

J

"1.4.4 Turning Off the Server" (Pg.35)).

Summary of Contents for primergy TX150


















































































































































































































































































































Reviews:

No comments

Related manuals for primergy TX150

NEC Express5800/320Ma Software Installation And Configuration Manual preview
Express5800/320Ma
Brand: NEC Pages: 86
IBM 6219 - IntelliStation M - Pro Configuration And Options Manual preview
6219 - IntelliStation M - Pro
Brand: IBM Pages: 317
YOKOGAWA SMARTDAG+ GM10 User Manual preview
SMARTDAG+ GM10
Brand: YOKOGAWA Pages: 22
Sun Microsystems Netra t 1120 Service Manual preview
Netra t 1120
Brand: Sun Microsystems Pages: 148
ImageTech printWiFi User Manual preview
printWiFi
Brand: ImageTech Pages: 44
IBM 84894MU User Manual preview
84894MU
Brand: IBM Pages: 48
H3C UniServer R4300 G6 User Manual preview
UniServer R4300 G6
Brand: H3C Pages: 542
Cabletron Systems Access Server 316 Hardware Owner'S Manual preview
Access Server 316
Brand: Cabletron Systems Pages: 70
QNAP TBS-464-8G Quick Installation Manual preview
TBS-464-8G
Brand: QNAP Pages: 16
Generac Power Systems 10000039844 Owner'S Manual preview
10000039844
Brand: Generac Power Systems Pages: 52
AIC SB101-LB User Manual preview
SB101-LB
Brand: AIC Pages: 86
AIC SB402-LB User Manual preview
SB402-LB
Brand: AIC Pages: 97
AIC SB151-LB User Manual preview
SB151-LB
Brand: AIC Pages: 81
D-Link AirPlus G DP-G301 Quick Installation Manual preview
AirPlus G DP-G301
Brand: D-Link Pages: 18
Lindy 42394 Quick Start Manual preview
42394
Brand: Lindy Pages: 2
Supermicro SuperServer 510P-WT/WTR User Manual preview
SuperServer 510P-WT/WTR
Brand: Supermicro Pages: 113
TechnipFMC Proline Promass 300 EtherNet/IP Manual preview
Proline Promass 300 EtherNet/IP
Brand: TechnipFMC Pages: 36
B+B SmartWorx VESP211 Series Quick Start Manual preview
VESP211 Series
Brand: B+B SmartWorx Pages: 2

Brands by name

Popular brands

Load more brands