Fujitsu primergy TX150 User Manual Download Page 102

Page: 102 / 305

102

Chapter 3 OS Installation Using ServerStart

■

Starting Installation

On the PXE server, start up ServerStart.

If ServerStart has already been started, you do not have to restart it. If it is not started, click
[Start]

→

[Programs]

→

[Fujitsu ServerStart]

→

[ServerStart].

The [Welcome to ServerStart] window appears.

Click [Click here to prepare an operating system installation for a PRIMERGY
Server].

The [Select an Operating System] window appears.

Click [Microsoft Windows Server Operating System -Preparing and/or initiating
a Remote Installation].

The [Microsoft Windows Operating System Installation] window appears.

Click the OS to install.

The [Preparing the Installation] window appears.
If a configuration file has already been created, go to Step 6.

Set items in wizards to create a configuration file.

Refer to "3.2.2 Configure Settings in Wizards" (

pg.78). Set items in wizards and save the

configuration file.
Exiting a wizard returns to the preconfiguration mode window.

Click [Click here to initiate the Remote Installation Process].

The [Remote Installation Target Server] window appears.

Summary of Contents for primergy TX150


















































































































































































































































































































Search results

Summary of Contents for primergy TX150

Reviews:

Related manuals for primergy TX150

Brands by name

Popular brands

Fujitsu primergy TX150, User Manual

Search results

Summary of Contents for primergy TX150

Reviews:

Related manuals for primergy TX150

Brands by name

Popular brands