Fujitsu primergy TX150 User Manual Download Page 150

Page: 150 / 305

150

Chapter 5 Operations after OS Installation

■

Paging File Setting

Set up the paging file according to the following procedures:

Log on to the server with administrator privileges.

Check free space of the drive where the system is installed.

Check the required amount of free space according to "

■

Checking Hard Disk Free Space"

(

pg.147). If the drive has no free space, refer to "

■

Cannot Collect the Memory Dump"

(

pg.268).

Click [Start]

→

[Settings]

→

[Control Panel].

Double-click the [System] icon.

The [System Properties] window appears.

Click the [Advanced] tab and click [Performance Options].

The [Performance Options] window appears.

Summary of Contents for primergy TX150


















































































































































































































































































































Search results

Summary of Contents for primergy TX150

Reviews:

Related manuals for primergy TX150

Brands by name

Popular brands

Fujitsu primergy TX150, User Manual

Search results

Summary of Contents for primergy TX150

Reviews:

Related manuals for primergy TX150

Brands by name

Popular brands