Fujitsu PRIMERGY RX600 S4, User Manual

Page: 176 / 230

176
Chapter 8 Operation and Maintenance
8.1.3 Replacement of Consumable Items
Consumable items are required to be replaced to maintain their performance and function. Users are
responsible for procurement and replacement of consumable item shown below. For procurement,
contact an office listed in the "Contact Information" of "Start Guide".
„
Consumable items
This server contains the consumable item listed below. For how to replace a battery backup unit of the
SAS array controller card (standard), refer to "
„
How to replace a battery backup unit (standard)"
(
J
pg.176).
„
How to replace a battery backup unit (standard)
This section describes how to replace a battery backup unit of the SAS array controller card installed as
a standard feature.
table: Consumable items
Consumable item Product ID Objective product Description
Battery Backup Unit PG-BBU3 SAS array controller card
(standard) The Battery Backup Unit is required to be
replaced within 3 years from procurement of
the server or the previous replacement
regardless of the accumulated time period of
use.
PG-BBU2 SAS array controller card
(PG-244C)
• Before installing/removing a battery backup unit, turn off the server, all
peripheral devices, and any other connected devices. Also unplug all power
cables from the outlet. Failure to do so can cause electric shock.
• Devices inside the server remain hot after shutdown. Wait for approximately
10 minutes after shutdown before installing or removing internal options.
• The exposed parts of circuit boards and soldered parts can be damaged by
static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards and soldered parts. Hold the metallic
areas or the edge of the circuit boards.