Fujitsu PRIMERGY RX600 S4, User Manual

Page: 98 / 230

98
Chapter 4 Operations after OS Installation
„
Teaming configuration procedure
1
Click [Start] – [Administrative Tools] – [Computer Management] to start up
Intel
®
PROSet.
2
Click [Network adapters] under [Device Manager] and double-click a LAN
adapter to be incorporated in a team.
3
Click the [Teaming] tab, select [Team with other adapters] and click [New
Team].
4
Enter a team name and click [Next].
5
Check the LAN adapter to be incorporated in the Team and click [Next].
6
Select a Teaming type with which a Team will be created and click [Next].
Select the following Teaming type depending on team type:
• AFT: "Adapter Fault Tolerance"
• ALB: "Adaptive Load Balancing"
• SFT: "Switch Fault Tolerance"
• Static Link: "Static Link Aggregation"
7
Click [Finish].
8
Click [OK] to close the property window of the created Teaming adapter.
9
Click [OK] to close the property window of the LAN adapter.
When the Teaming setting is completed, the following virtual adapter will be created.
• "Team:(Team Name)"
Upper protocols will be bound with the main virtual adapter.
They can not be bound with the LAN card included in a Team.
The IP address can be set on the main virtual adapter.