Fujitsu PRIMERGY RX600 S4, User Manual

Page: 175 / 230

175
PRIMERGY RX600 S4 User's Guide
„
Cleaning the server
Wipe with a soft, dry cloth. For difficult stains, wipe with a cloth lightly dampened with a mild
detergent. Once the stain has been removed, wipe off any remaining detergent with a cloth dampened
with water. When wiping the server, be sure that no liquid enters the server.
Do not use solvents. Use mild detergents only. Otherwise, the server may be damaged.
Use a vacuum cleaner periodically to avoid dust accumulation in ventilation holes.
` In dusty environments, the front and rear panels of the server gather dust in the short term, which may
cause a server failure. Change the server location to avoid failures.
„
Cleaning interior of the server
In dusty environments, dust accumulates inside of the server. Dust deposits may cause a server failure,
fire, or electric shock. To keep the PRIMERGY server in good condition, vacuum the interior of the
server periodically to remove dust deposits.
Cleaning components
` CPU: Dust deposits must be removed, otherwise it will impair the cooling performance.
` Fan: Remove dust from and around the fan.
` Memory / Expansion cards: Remove dust between memory modules and between expansion cards.
Remove dust from the connector before adding a memory module or an expansion card.
` Internal hard disk units / 5-inch internal devices: Remove dust deposits from units and devices. Tape
devices are particularly susceptible to dust and may cause failures. Install them in a clean
environment.
` Be careful when removing components such as CPU, memory modules, or hard disk units. Be sure to
install parts and cables in the original position.
` Leaving dust on the server can cause failure. Be sure to remove any dust from the server.
„
Optional devices
For details about cleaning optional devices, refer to the manual for each optional device.
• Do not disassemble the PSU when cleaning the server interior. Doing so can
cause failures or electric shock.