Fujitsu PRIMERGY RX600 S4, User Manual

Page: 82 / 230

82
Chapter 4 Operations after OS Installation
4.3.1 Storing the BIOS Information and the Remote
Management Controller Information
Store the BIOS information and the Remote Management Controller information according to the
following procedures.
` Before starting the operation, if the boot monitoring function of ServerView is enabled, disable it (it is
disabled by default). If you start up the system while the boot monitoring function remains effective, the
operation of the server may become unpredictable at such times as an abrupt power interruption or
restart.
If it is necessary to operate the server with the boot monitoring function enabled, enable the function
after storing the BIOS information and the Remote Management Controller information. For details of
ServerView, refer to "ServerView User's Guide".
` "Server Management Tools" disk is required to be created when stated as "blank" on the label of the
"Server Management Tools" disk, supplied with the server. Create "Server Management Tools" disk by
referring to "4.4 Creating Maintenance Tools and Driver Disks" (
J pg.84).
` Connect a USB floppy disk drive, and configure settings in "7.2.19 Boot Menu" ( J pg.171) to give the
highest priority to the USB floppy disk drive.
1
Insert the "Server Management Tools" disk into the floppy disk drive and turn
on the server.
The window for selecting a keyboard appears.
2
Select a keyboard.
Select [1] for Japanese keyboard or select [2] for English keyboard. Japanese keyboard is
selected by default.
3
When the DOS Prompt window appears, enter the following command and
press the [Enter] key.
4
If the BIOS information or the Remote Management Controller information is
stored successfully, the following message appears.
5
Confirm that the stored information files are created.
Enter the following command to display the stored information files which are created.
The BIOS information has been stored. The server can now be turned off safely.
Please select:
1 = JP Keyboard
2 = US Keyboard
Your selection
A:\SMT>BIOSSAVE.bat
Success !
A:\SMT>dir