manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, System Design Manual

Share
Download
Fujitsu PRIMEQUEST 440 System Design Manual Download Page 181

C122-B001-02EN

6-3

 

6.1 Redundancy of Components

• Xbar Data Interconnect board (XDI)

An XDI is a board on which ASIC (GDX) that controls data paths of the crossbar is 
mounted.  An XDI has ports to connect to SBs and IO_Units, and transfers data 
between ports.  As basic configuration, four XDIs are mounted.  It is possible to adopt 
redundant configuration (duplication) handling two XDIs as a set.  The redundant 
configuration is referred to as a mirror mechanism.  For details, see Section 

6.3, 

"System Mirror."

• Xbar Address Interconnect board (XAI)

An XAI is a board on which ASIC (GAC) that controls address paths of the crossbar 
is mounted. An XAI has ports to connect SBs and IO_Units, and transfers address 
information between ports.  As basic configuration, two XAIs are mounted.  It is 
possible to adopt redundant configuration (duplication).  The redundant configuration 
is referred to as a mirror mechanism.  For details, see Section 

6.3, "System Mirror."

• Management Board (MMB)

Two MMBs are mounted in the basic configuration.  One of them is in the active state 
while the other is in the standby state.

• IO_Unit

One to up to eight IO_Units can be mounted.  Redundant configuration can be 
adopted depending on the operation methods.  For details, see 

6.4, "Redundancy of an 

HDD (Use of PRIMECLUSTER GDS),"

 

CHAPTER 8, "Partition,"

 and 

CHAPTER 9, 

"Clustering."

  An IO_Unit has four HDDs and four PCI cassettes.  An IO_Unit has 

four PCI-Box interface ports to connect to a PCI_Box that expands the number of PCI 
slots.  To increase the number of PCI slots, connect a PCI-Box interface port to a 
PCI_Box with cables.

• PCI_Box

Up to 12 PCI cards can be inserted in a PCI_Box that is connected as an option to the 
PCI-Box interface output from an IO_Unit.  Redundant configuration can be adopted 
depending on the operation method.

• Gigabit Switch Board (GSWB)

In the basic configuration, no GSWB is mounted.  Two boards can be mounted as an 
option.  If two boards are mounted, redundant configuration can be adopted.

• Power Supply Unit (PSU)

A PSU converts AC input to 48 VDC.  This unit adopts redundant configuration as 
basic configuration.

• FAN Tray (FAN)

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands