Fujitsu PRIMEQUEST 440 System Design Manual Download Page 247

Page: 247 / 280

C122-B001-02EN

10-13

10.3 Comparison of Backup Methods

Backup
software

Softek ACM
(Linux)

General data
stored in the
ETERNUS disk
array unit
(backup of a
system volume
by booting SAN
and backup of
data areas)

• It is possible to perform backup without

applying load to a LAN.

• It is possible to perform backup during

DB (Oracle/Symfoware) operation.

• It is possible to back up and restore a

system volume while booting from a
SAN.

• PRIMECLUSTER is supported.

VERITAS
NetBackup
(Linux)

Backup of data
areas (large scale
DB)

• It is possible to perform backup during

DB (Oracle) operation.

• NetBackup has a track record for DB

backup of large-scale systems.

• It is possible to manage a mixed

platform environment by using one
server.

NetVault
(Linux)

Backup of a
system volume
and backup of
data areas (small
to middle scale
DB)

• It is possible to perform backup during

DB (Oracle) operation.

• Setup for a small-scale system is

possible at low cost.

• It is possible to back up and restore a

system volume (disaster recovery).

NetWorker
(Linux)

Backup of data
areas

• It is possible to perform backup during

DB (Oracle) operation.

• High affinity with PRIMECLUSTER

Softek TSM
(Linux)

Backup of data
areas

• It is possible to perform backup during

DB (Oracle) operation.

• Setup for a small-scale system is

possible at low cost.

• Unified backup operation is possible

because of multiplatform support.

Appliance

ETERNUS
SP5000
(Linux/
Windows)

Backup of data
areas on the
ETERNUS disk
array unit

• It is possible to autonomously perform

backup without applying load to a
LAN.

• It is possible to perform backup during

DB (Oracle/Symfoware) operation.

• PRIMECLUSTER is supported.

Method

Main usage

Characteristics

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Search results

Summary of Contents for PRIMEQUEST 440

Reviews:

Brands by name

Popular brands

Fujitsu PRIMEQUEST 440, System Design Manual

Search results

Summary of Contents for PRIMEQUEST 440

Reviews:

Brands by name

Popular brands