manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, System Design Manual

The Fujitsu PRIMEQUEST 440 Installation Planning Manual is a comprehensive guide that ensures a seamless setup of this powerful product. This essential manual can be downloaded for free from manualshive.com, providing users with step-by-step instructions and valuable insights to optimize their PRIMEQUEST 440 experience. Don't miss out on this invaluable resource!

Share
Download
background image

9-8

C122-B001-02EN

CHAPTER 9 Clustering

 

9.2.2

PRIMECLUSTER

PRIMECLUSTER is a software product for constructing a cluster system.

PRIMECLUSTER virtualizes system-configuring elements such as servers, storage, 
networks, and middleware, and enables job processing to be continued autonomously 
by error detection, failover (job takeover), and degradation functions to implement 
high reliability of the entire system.

Even if a failure occurs in an operating partition or in the cabinet, high availability can 
be implemented by having a standby partition and –cabinet take over job processing.

Machines of the PRIMEQUEST series perform communication between 
PRIMECLUSTER and the MMB to provide the following functions:

z

System state monitoring

 

This function displays the state of a specified node and reports it to the MMB.

z

System state notification

 

This function reports changes in the operation state of the local node to another 
node.

1

OS-detected events such as OS running and shutdown are reported to the 
MMB.

2

When a change in the partition state is detected, the MMB sends a trap to an 
associated node registered in advance.

3

A trap is sent to both of the duplicated management LANs.

z

Event reception from the other system (in the pair active server 

↔

 standby server)

 

This function receives information about changes in the state of the other node.

 

This function receives information from the other MMB and filters duplicated trap 
data.

z

Instruction to the other system (in the pair active server 

↔

 standby server)

 

This function sends a Panic instruction and a Reset instruction to a specified other 
node.

1

A control instruction from PRIMECLUSTER is reported to the MMB of the 
other system.

2

The MMB controls the partition through a private LAN.

z

Remote power control

 

This function sends a power-on instruction or a power-off instruction to a specified 
other node.

1

A control instruction from the PRIMECLUSTER is forwarded to the MMB 
of the other system.

2

The MMB controls power of the partition through a private LAN.

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Reviews:

No comments

Related manuals for PRIMEQUEST 440

Cabletron Systems MicroMMAC 22ES Installation Manual preview
MicroMMAC 22ES
Brand: Cabletron Systems Pages: 93
QNAP TS-130-US User Manual preview
TS-130-US
Brand: QNAP Pages: 39
sysmik ICS-709 Installation Notes For Electrical Personnel preview
ICS-709
Brand: sysmik Pages: 2
Zycoo IAS-L100 Manual preview
IAS-L100
Brand: Zycoo Pages: 36
Generac Power Systems 10000039844 Owner'S Manual preview
10000039844
Brand: Generac Power Systems Pages: 52
EVS LSM Connect User Manual preview
LSM Connect
Brand: EVS Pages: 126
360 Systems ImageServer 2000 Operation Manual preview
ImageServer 2000
Brand: 360 Systems Pages: 135
Intel A96134-002 Installation And Operating Instructions Manual preview
A96134-002
Brand: Intel Pages: 10
Acnodes RMC 7130 Installation Manual preview
RMC 7130
Brand: Acnodes Pages: 8
Kano NetCOR Quick Start Manual preview
NetCOR
Brand: Kano Pages: 5
Inspur NF5266M6 Installation Manual preview
NF5266M6
Brand: Inspur Pages: 2
Gateway 8400 System Manual preview
8400
Brand: Gateway Pages: 146
IBASE Technology FWA8408 User Manual preview
FWA8408
Brand: IBASE Technology Pages: 75
GarrettCom DynaStar DS2000-TS Administrator'S Manual preview
DynaStar DS2000-TS
Brand: GarrettCom Pages: 122
Quick Eagle Networks 4262 Specification Sheet preview
4262
Brand: Quick Eagle Networks Pages: 2
NEC 120Rf-2 Getting Started preview
120Rf-2
Brand: NEC Pages: 2
IBM 883725U Installation Manual preview
883725U
Brand: IBM Pages: 114
IBM Power System E880C Removal And Replacement Procedures preview
Power System E880C
Brand: IBM Pages: 32

Brands by name

Popular brands

Load more brands