manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, System Design Manual, Page: 246 / 280

Share
Download
Fujitsu PRIMEQUEST 440 System Design Manual Download Page 246

10-12

C122-B001-02EN

CHAPTER 10 Backup and Restoration

 

10.3

 Comparison of Backup Methods

Table 10.1

 lists the usage method and characteristics of various backup and 

restoration methods.  The requirements for the backup methods vary with the 
operation.  The methods appropriate to each requirement need to be combined to back 
up data.

Table 10.1  Comparison of backup methods

Method

Main usage

Characteristics

OS-standard

dump/restore 
(Linux)
NTBackup 
(Windows)

Backup of a 
system volume 
(single)

• It is possible to back up and restore a 

system volume.

• These are OS-standard functions.  The 

user is normally accustomed to their 
operation.

Cloning 
software

Systemcast 
Wizard Lite 
(Linux/
Windows)

Backup of a 
system volume 
(batch)

• It is possible to back up and restore a 

system volume.

• Automatic processing is possible in 

cooperation with a MMB via a network.

• It is possible to perform concurrent 

parallel backup of multiple partitions.

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Reviews:

No comments