manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, System Design Manual

Share
Download
Fujitsu PRIMEQUEST 440 System Design Manual Download Page 243

C122-B001-02EN

10-9

 

10.2 General Methods of Backup and Restoration

• Online backup of a DB (Oracle)

For Oracle, Recovery Manager (RMAN) provided by Oracle becomes the interface to 
the DB. VERITAS NetBackup Oracle Agent is linked to RMAN, and data is passed 
from Oracle Agent to VERITAS NetBackup.

Figure 10.6  Online backup of a DB using VERITAS NetBackup

• Backup of a system volume

This operation is not supported.

Configuration example when NetVault is used (Linux)

• Normal backup of data

The configuration is the same as the case where VERITAS NetBackup is used.

 

The user can use the GUI on a NetVault server terminal or a NetVault remote 
management terminal via a LAN to back up or restore data.  To perform backup of 
multiple terminals at the same time, a NetVault server disk, as a backup destination, 
should be a virtual tape library.

• Online backup of a DB (Oracle)

The configuration is the same as the case where VERITAS NetBackup is used.

To perform online backup of a database by NetVault GUI, use the NetVault 
application plug-in module (APM) to seamlessly integrate the online backup API 
provided by Oracle and NetVault.

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands