manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, System Design Manual

Share
Download
Fujitsu PRIMEQUEST 440 System Design Manual Download Page 41

C122-B001-02EN

1-9

 

1.2 PRIMEQUEST Features

1.2.1.2 IPF

The PRIMEQUEST-series machines contain IPF processors, which are Intel 64-bit 
processors.

The IPF features reliability and performance levels, as described below, suitable for 
large-scale mission-critical systems:

• High reliability

The reliability, availability and serviceability (RAS) function is enhanced by the error 
detection and correction function incorporated for cache memory and other 
components.  This improves business continuity.

• High performance

The IPF improves performance because its 64-bit processors use an expanded 
memory address space and have higher computing speeds.

• Openness

Since the IPF processors are open-standard IA processors, a wide range of IPF 
independent software vendor (ISV) and independent hardware vendor (IHV) products 
can be used, thereby expanding the selection of products for system construction.

1.2.1.3 Symmetric multi-processing (SMP) technology

Each processor is the same as any other processor in a multiprocessor system using 
SMP technology, so processing can be assigned to any processor.  High scalability can 
thus be obtained with applications unchanged.

In an SMP system configuration with multiple SBs linked, the PRIMEQUEST 480 
supports up to 32 CPUs, and the PRIMEQUEST 440 supports up to 16 CPUs.

By using large-scale SMP technology originally developed for mainframes and UNIX 
servers, high performance suitable for a high-reliability large-scale mission-critical 
system is implemented.

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands