Fujitsu PRIMEQUEST 440 System Design Manual Download Page 111

Page: 111 / 280

C122-B001-02EN

4-5

4.1 Basic Mechanism

Operator console (Web-UI, SSH, etc.)

Connected as the console of the MMB and each partition

Management console

Used for linkage with the operation management system of an external server such
as the Server System Manager

Integrated monitoring software linkage

Used for linkage with integrated monitoring software such as Systemwalker

Firmware update

Used for updating various types of firmware from the MMB

Time synchronization

Used for synchronizing the time of each SB while the MMB operates as the NTP
server

External connection

The following three ports are provided for external connection of the management
LAN.
- User port

For management purposes such as connecting an external management server
and using the operation console

- Fujitsu certified services engineer’s port

For connection to a maintenance terminal

- REMCS port

For connection to the REMCS Center

The ports for REMCS connections can be selected based on the customer's
requirements as follows:

- P-P connection

Connect a dial-up router directly to the REMCS port.

•

Si-R30/130 dial-up router (10BASE-T4 port on the LAN side)

•

Si-R 170 broadband router (10BASE-T4 port on the LAN side)

For the connection to either of the above routers, the settings of the MMB
port must be 10 Mbps and half-duplex fixed.

- Internet connection

For an REMCS connection established through the network that is connected to
a user port through a firewall, the REMCS port need not be used.

For an REMCS connection established through a network that is not connected
to a user port because of security requirements, use the REMCS port.

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Search results

Summary of Contents for PRIMEQUEST 440

Reviews:

Brands by name

Popular brands

Fujitsu PRIMEQUEST 440, System Design Manual

Search results

Summary of Contents for PRIMEQUEST 440

Reviews:

Brands by name

Popular brands