manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, System Design Manual

Share
Download
Fujitsu PRIMEQUEST 440 System Design Manual Download Page 101

C122-B001-02EN

3-3

 

3.2 OS (Linux or Windows)

3.1.5

MMB firmware

MMB firmware is incorporated in the MMB.  MMB firmware is linked with different 
types of firmware (e.g., PAL/SAL/EFI, BMC firmware, and GSWB firmware) for 
operations such as managing the entire PRIMEQUEST hardware configuration, 
managing partition configurations, hardware monitoring, and power control.

For details on the MMB, see 

CHAPTER 4, "Hardware System Management."

3.1.6

GSWB firmware

GSWB firmware is incorporated in the GSWB, and it controls a LAN switching hub 
(GSWB).  GSWB firmware is operated via MMB firmware.  GSWB firmware is used 
to construct and manage network systems using user LANs (business LANs).

For details on the GSWB, see 

CHAPTER 5, "Business LAN Management by 

GSWB."

3.2

OS (Linux or Windows)

PRIMEQUEST supports the following OSs.  The OSs are installed and used in 
individual partitions.

• Linux

-  Red Hat Enterprise Linux AS (v.4 for Itanium)

• Microsoft Windows Server 2003

-  Windows Server 2003, Enterprise Edition, for Itanium-based System

-  Windows Server 2003, Datacenter Edition, for Itanium-based System

Summary of Contents for PRIMEQUEST 440

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands