Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
94
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
The procedure to initialize an SDV is as follows:
Procedure
1
Select the SDV to be initialized (multiple selections can be made) and click
[Initialize SDV] in [Action].
→
A confirmation screen appears.
2
Click the [OK] button.
→
Initialization of the SDV starts.
3
Click the [Done] button to return to the [Volume] screen.
End of procedure
•
After initializing an SDV, any data that is stored in the SDV cannot be
accessed. Make sure to backup the required data.
•
This function cannot be used under the following conditions:
-
When the target volume is not an SDV
-
When LDE is being performed in the RAID group to which the target
volume belongs
-
When the target volume status is not "Available"
-
When Advanced Copy is being performed in the target volume
When an SDV is initialized, the area that is allocated from the SDPV to the
SDV is released.
