Fujitsu Eternus web GUI User Manual Download

Page: 113 / 635

Chapter 6 RAID Group Management
6.1 RAID Group Status

ETERNUS Web GUI User’s Guide

113

P2X0-1090-02ENZ0

6.1.3

RAID Group (ECO Mode)

This function displays the setting status of the ECO mode that is applied for the RAID group.

The following items are displayed in the Main area:

•

No.
The RAID group number is displayed. Clicking this item displays the [RAID Group (Basic)]
screen.

•

Name
The RAID group name is displayed. Clicking this item displays the [RAID Group (Basic)]
screen.

•

Status
The RAID group status is displayed. Refer to

"B.3 RAID Group Status" (page 614)

for detailed

information of RAID group status.

•

Usage
The usage of the RAID group is displayed.

Standard
A RAID group that is used for creating "Standard", "SDV", or "SDPV" type volumes

•

RAID Type
The RAID type is displayed.

High Performance (RAID1+0)

High Capacity (RAID5)

High Reliability (RAID6)

Reliability (RAID5+0)

Mirroring (RAID1)

•

To use the ECO mode, follow the procedure in

"11.2.6.1 Modify ECO

Mode General Setting" (page 540)

and

"11.2.6.2 Create ECO Mode

Schedule" (page 541)

to perform the common ECO mode setup and

create an ECO mode schedule.

•

To assign the ECO mode to a RAID group, refer to

"6.2.7 Assign ECO

Mode Schedule" (page 131)

Summary of Contents for Eternus web GUI




























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Eternus web GUI

Reviews:

Related manuals for Eternus web GUI

Brands by name

Popular brands

Fujitsu Eternus web GUI, User Manual

Search results

Summary of Contents for Eternus web GUI

Reviews:

Related manuals for Eternus web GUI

Brands by name

Popular brands