Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
315
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
3
Add or delete a host in a host group in the following procedures.
■
Add or delete a host by clicking the [Registered And Now Connected] tab
(1)
Add or delete FC hosts, and click the [Modify] button.
-
Checkbox to select hosts
Select the corresponding host checkbox in the FC host list, to add a host.
Clear the corresponding host checkbox in the FC host list, to delete a host.
→
A confirmation screen appears.
■
Add a host by clicking the [Manual Input] tab
(1)
Click the [Add] button.
→
The [Add FC Host] screen appears.
If the WWN is not displayed when clicking the [Refresh] button, make
sure that there is no error in the connection environment, such as the
connection between the host and the switch, and the CA port
settings of the ETERNUS DX Disk storage system. If there is no
error in the connection environment, contact the Support
Department, or specify the WWN manually.
