Fujitsu DL9300, User Manual

Page: 125 / 250

USING SETUP MODE
User's Manual 5-34
Table 5.5 ADJUST Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
ADJUST
Items
Options Description
<CNT-LFT> Fine-tunes the left print
start position for
continuous forms.
-10/90, ..., 0/90, Moves the position left or
..., 10/90 right in increments of 1/90
inch (0.28 mm).
<CUT-LFT> Fine-tunes the left print start
position for single sheets.
-10/90, ..., 0/90, Moves the position left or
..., 10/90 right in increments of
1/90 inch (0.28 mm).
<CUT-ADJ> Compensates the line
spacing pitch on the basis
of the spacing error
accumulated for feeding
single sheets by10 inches.
-22/360, ..., 0/360, Decreases or increases in
..., 22/360 increments of 1/360 inch in
total.
<==END==> Indicates the end of the
ADJUST item list. Press
↓
MICRO to print the first
item, which is <CNT-
ORG>. Press
↑
MICRO to
print the last item, which is
<CUT-ADJ>. Press
ONLINE to reprint the
<<FUNCTION>> menu.