FujiFilm SONOSITE X-PORTE, User Manual

Page: 60 / 366

3-24 Setting up the system
1 Tap MORE , and then tap System Settings .
2 Tap Connectivity in the list on the left.
3 On the Connectivity setup page, tap DICOM Setup .
4 In the Location list, select the location of the system.
5 In the list of devices, check the box next to one or more archivers, printers, or worklist servers.
You can select a maximum of two printers, four archivers, and one worklist server for each location. Only
one archiver can be selected to receive in-progress transfers. Selected devices have a check mark in the
left-hand column.
6 If you want to use the MPPS service, associate the MPPS server with the archiver:
a Check the box of the MPPS server that you want. (MPPS servers appear near the end of the list.)
b Check the box of the archiver.
c Check the box in the archiver's MPPS column.
7 If you want to use the storage commitment service, associate the storage commitment server with the
archiver:
a Check the box for the storage commitment server that you want. (Storage commitment servers appear at
the end of the list.)
b Check the box for the archiver.
c Check the box in the archiver's SC column.
8 Complete any additional configuration tasks, and then tap Done .
To disassociate devices with a location
1 Tap MORE , and then tap System Settings .
2 Tap Connectivity in the list on the left.
3 On the Connectivity setup page, tap DICOM Setup .
4 In the Location list, select the location.
5 Do any of the following:

To disassociate a printer, archiver, or worklist server, select its check box.

To disassociate an MPPS server from an archiver, select the check box for the MPPS server.

To disassociate a storage commitment server from an archiver, select the check box for the storage
commitment server.

To disassociate an archiver from all servers, deselect and then reselect its check box.
6 Tap Done .