FujiFilm SONOSITE X-PORTE, User Manual

Page: 130 / 366

5-2 Measurements and calculations
Viewing and deleting measurement results
The current measurement result appears on the left side of the touch panel under Measure . To assign it to
a calculation, see “Assigning measurements to calculations” on page 5-8.
If you perform multiple measurements, tapping an entry under Measure highlights the corresponding
calipers on the image.
To delete a measurement

Tap the measurement under Measure , and then tap Delete .
Basic measurements in 2D
To measure the distance between two points
1 On a frozen image, tap Distance .
A caliper appears.
If this control is hidden, tapping More Controls displays it.
2 Drag the active caliper to the first point.
3 Drag the other caliper to the second point.
4 As needed, tap and drag each caliper until it is precisely positioned.
To measure circumference or area using an ellipse
1 On a frozen image, tap Ellipse .
If this control is hidden, tapping More Controls displays it.
An ellipse with three calipers appears.
2 Position and resize the ellipse:

To position, drag the calipers.

To resize, drag the calipers, the handle, or both.
To measure circumference or area by tracing
1 On a frozen image, tap Trace .
If this control is hidden, tapping More Controls displays it.
A caliper appears.
Note You can measure across images in Dual only with a linear transducer, and only
when the images are at the same depth and magnification.