![FujiFilm SONOSITE X-PORTE User Manual Download Page 126](http://html1.mh-extra.com/html/fujifilm/sonosite-x-porte/sonosite-x-porte_user-manual_2342271126.webp)
4-50
Imaging
To use the ECG feature
1
Select the cardiac exam type on the P10xp, P21xp, or TEExp transducer (see
2
Connect the ECG cable to the ECG port on the ultrasound system.
ECG tracing is enabled automatically.
Figure 4-6
ECG port
3
Tap
ECG
.
If this control is hidden, tapping
More Controls
displays it.
4
Do any of the following in the
ECG Settings
window:
To display the ECG trace, select
Show
.
Cautions
Use only accessories recommended by FUJIFILM SonoSite with the system.
Connecting an accessory not recommended by FUJIFILM SonoSite can damage
the system.
If you defibrillate a patient while the ECG module is connected to the system, the
ECG signal may display incorrectly, and the ECG module may need to be
replaced.
Note
The ECG signal may take up to one minute to restabilize after defibrillator use
on a patient.
Summary of Contents for SONOSITE X-PORTE
