FujiFilm PXG4, Operation Manuals

Page: 74 / 158

– 73 –
8
Chapter
Note 1: Displays when the seventh digit is H, K, F, 2, or E, and the eleventh digit is D.
Note 2: Displays when the fifth digit of the model code is E or P.
Note 3: Select a setting range that fits the output type.
Note 4: Displays when the sixth digit of the model code is R or S.
Note 5: Displays when the sixth digit of the model code is E or P.
Note 6: Displays when the fifth digit of the model code is not S or V, and the sixth digit is A, C, E, or P.
Note 7: Make sure to set “0:00” during dual control.
Note 8: Turn off the power to the unit after changing the parameters with in the remarks column.
Note 9: The range of the parameters in the shaded area indicates the initial values.
" C2r " (C2r) OUT2 range Sets the range of the control output
(OUT2)(Sets also for re-transmission
output) 0-5 (0mA to 5V)
1-5 (1V to 5V)
0-10 (0mA to 10V)
2-10 (2V to 10V)
0-20 (0mA to 20mA)
4-20 (4mA to 20mA) 0-10
(Voltage)
4-20
(Current) Note 3
Note 4
Note 5 83
" FLo1 " (FLo1) Output 1 set value
during FALT Sets the output value for the control
output (OUT1) during FALT -3.0% to 103.0% -3.0% 83
" FLo2 " (FLo2) Output 2 set value
during FALT Sets the output value for the control
output (OUT2) during FALT -3.0% to 103.0% -3.0% Note 6
" SFo1 " (SFo1) Soft start OUT1
set value Sets the output value for the control
output (OUT1) during soft start -3.0% to 103.0% 103.0% 84
" SFTM " (SFTM) Soft Start
detection time Sets the time from power-on to soft
start completion 00:00 to 99:59 (hour:min) 0.00
(hour:min) Note 7
" Sbo1 " (Sbo1) OUT1 set value
during standby Sets the output value for the control
output (OUT1) during standby -3.0% to 103.0% -3.0% 85
" Sbo2 " (Sbo2) OUT2 set value
during standby Sets the output value for the control
output (OUT2) during standby -3.0% to 103.0% -3.0% Note 6
" SbMd " (SbMd) Standby mode
setting Sets the alarm output, PV/SV display
in standby mode. 0
Note 8
85
" AoT " (AoT) Types of AO
output Specify the re-transmission input
type. PV
SV
MV
DV Pv Note 4 86
" AoL " (AoL) AO lower limit
scaling -100% to 100% FS 0% Note 4 87
" Aoh " (Aoh) AO upper limit
scaling -100% to 100% FS 100% Note 4
Display Parameter name Function Setting range Initial value Remarks
Reference
Page
ALM
Display/
Output Ao
Output PV/SV
Display
0 OFF ON ON
1 ON ON ON
2 OFF OFF ON
3 ON OFF ON
4 OFF ON OFF
5 ON ON OFF
6 OFF OFF OFF
7 ON OFF OFF
RST
RST