FujiFilm PXG4, Operation Manuals

Page: 23 / 158

– 22 –
3
Chapter
Overview of Operation Parameters (Ch1)
Operation parameters handle all operation controls.
The operation menu includes the following items.
Note 1: Displays when the seventh digit of the model code is H, K, F, 2 or E, or the eleventh digit is D.
Note 2: Displays when the ninth digit of the model code is not 0, or the eleventh digit is C.
Note 3: The range of the parameters in the shaded area indicates the industrial values.
Note 4: When changing the SV value with the front panel key, do not change the "
Svn
" parameter with communication. The
changed SV value may not be stored correctly.
Display Parameter name Function Setting range
Initial
value
Remarks Page
"
Man
" (Man) Switches to manual
mode Switches between auto/manual
modes oFF (off)/on (manual) oFF 23
"
STbY
" (STbY) Switches between
RUN and standby Switches the operation mode
between run and standby oFF (off)/on (standby) oFF 24
"
rEM
" (rEM) Switches to remote
SV operation Switches between local and
remote SV operation LoCL (Local)/
rEM (Remote) LoCL (Note 1) 24
"
PrG
" (PrG) Ramp/Soak
Operation
command Switches between ramp/soak
operation states oFF (stop)
rUn (run)
hLd (hold) oFF Displays End
when finished,
and GS during
guaranteed soak. 25
"
AT
" (AT) Auto-tuning
running command Runs auto-tuning. oFF (stop/finish)
on (normal type)
Lo (low PV type) oFF 25
"
LACH
" (LACH) Cancel command of
the DO output latch Cancels the DO output latch state oFF/ rST
(latch reset) oFF (Note 2) 26
"
Svn
" (Svn) Selecting SV
number during
SV selection Chooses the SV No. used for
control Sv0 (Local SV)
Sv1 (SV=SV1)
Sv2 (SV=SV2)
Sv3 (SV=SV3)
Sv4 (SV=SV4)
Sv5 (SV=SV5)
Sv6 (SV=SV6)
Sv7 (SV=SV7)
di (select SV based on di) Sv0 (Note 4) 26
"
PLn1
" (PLn1) Currently selected
PID No. Chooses the PID group No. used
for control Pid0 (PID Ch)
Pid1 (PID group No. 1)
Pid2 (PID group No. 2)
Pid3 (PID group No. 3)
Pid4 (PID group No. 4)
Pid5 (PID group No. 5)
Pid6 (PID group No. 6)
Pid7 (PID group No. 7)
di (select Pid group No.
based on di) Pid0 27
" AL1 "
"
AL1l
"
"
AL1h
"
"
AL5
"
" AL5l "
" AL5h "
AL1 Setting
AL1L Setting
AL1h Setting
AL5 Setting
AL5L Setting
AL5h Setting Sets the alarm set value. 0 to 100% FS
(Absolute Alarm)
-100 to 100% FS
(Deviation Alarm) 10% (Note 3) 27
"
LoC
" (LoC) Key lock Sets the key lock to prevent
operation errors 0 (no lock)
1 (all lock)
2 (all but SV locked) 0 28
… …