59
3
SETUP AND MAINTENANCE
!3
Click [Cancel].
• Control returns to the “4 Setup and
Maintenance” screen.
For the daily morning pre-operation check, operation
returns to the “Printing Condition Upkeep” screen.
!4
Select “END [1]” on the menu bar.
• Control returns to the “Main Menu” screen.
3.5.3
Control Strip Storage and Handling Precautions
REFERENCE:
A control strip is used for checking the performance of the processing solutions. The package
contents consist of exposed but unprocessed paper strips, one reference strip (processed and
used as a density reference), and a correction factor chart for the reference strip. Process a control
strip and measure the reflection densities (R,G,B) with a densitometer to verify the processing
solution performance.
IMPORTANT
• Place the control strips inside a plastic bag and store them in a freezer (-10
°
C/14
°
F or below).
Storage at room temperatures will lead to deterioration in performance.
• Moisture condensation occurs if the control strips are processed immediately after they have
been taken out of freezer. This may give rise to uneven development. Let the control strips sit for
about one hour to bring it to room temperature.
• Do not open the folded end of the inner bag under any light. If you do, the control strips may
become fogged and rendered useless.
Summary of Contents for FRONTIER 390
