FujiFilm FRONTIER 390, Instruction Manual

Page: 140 / 173

142
W-4109
W-4110
W-4111
W-4112
W-4113
W-4114
W-4115
W-4116
W-4117
E-4118
W-4119
W-4120
W-4121
W-4122
W-4123
W-4124
W-4125
W-4126
W-4127
This order already contains the specified sort
No.
Quit this service, change the sort No., and
then resume the operation.
This order No. cannot be modified, because it
is not registered.
Enter a correct order No.
This sort No. does not exist in this order.
Enter a correct sort No.
The film mask is not supported with this image
export service.
Order currently created.
Wait.
The service cannot be closed, because there
is an order currently processed.
Wait.
The sort No. cannot be changed during this
image export service.
The sort No. was restored to match the order
condition.
The number of image export become
maximum.
Press SORT and continue as a next order.
Imaging Controller not recognised.
Perform pre-operational check.
Not enough free space to copy files.
This order being used.
Order not found.
Creating order that already exists was tried.
Correcting no-exist order tried.
Insufficient memory
A wrong film mask installed in the selected
printer.
The sort No. cannot be changed during the
image export service.
The sort No. was restored to match the order
condition.
Entered order No. created in other service.
Re-enter other order No.
Error occurred in the external I/O related
interface. Refer to the DI operating instructions.
No. Message Action to Take