FujiFilm FRONTIER 390, Instruction Manual

Page: 38 / 173

37
2
ADDITIONAL OPERA
TING INSTR
UCTIONS
q
Insert the film into the auto film carrier.
w
Proceed with printing until the frame to be
printed with RP-tone correction appears.
e
Select “Image Correct (4)” and “RP Tone
(4)” on the menu bar.
• The “RP-tone Correction” dialog box appears.
r
Move the cursor to “RP-tone Correction”
and select “Yes” or “No”.
t
Click [OK].
If [OK] is clicked, the frame is printed with the RP-
tone correction.
If [Hold] is clicked, the correction setup is held for the
following frames until the [SORT] key is pressed or
auto sort is done.
• The dialog box disappears.
RP-tone (Reversal Print-tone) prints can be made from a negative film by using the
RP-tone correction mode.
2.14
RP-tone Correction