FujiFilm FRONTIER 390, Instruction Manual

Page: 110 / 173

112
Install the film or mask.
Close the light source section cover.
Wait until the message disappears.
Perform “Scanner Correction” in the pre-
operational check menu.
Install the film carrier properly.
Process the film.
Close the film carrier pressure cover.
Remove the carrier and turn the release
knob counterclockwise to release the
cartridge holder.
Cartridge Holder Release Knob
EZ1327
Remove the film or mask and perform
scanner correction.
Remove the film carrier and install the
mirror box.
Consult a technical representative.
Perform “135 Light Source Aperture Table”
in Menu 433.
Film or mask not installed.
Install film or mask.
Light source cover is opened.
Close cover.
Stabilizing lamp.
Please wait. (Max. waiting time 10min)
Scanner correction not performed.
Perform scanner correction in “Pre-operational
Check”.
Carrier not installed.
Install carrier.
This film is not processed. Printing impossible.
Remove cartridge.
Carrier cover opened.
Close cover.
Removing cartridge failed.
Remove cartridge referring to manual.
Scanner correction cannot be performed
because with film or mask exists.
Take out film or mask.
Mirror box not installed.
Install mirror box.
Focus calibration not performed.
Call technical representative.
Focus position adjustment for each carrier not
performed.
Consult a technical representative.
Density measurement for ND filter not
performed.
Do measurement in “Scanner Adjustment/
Maintenance” menu.
Light source aperture table not created.
Create table through “Scanner Adjustment/
Maintenance” menu.
W-1101
W-1102
I-1103
W-1104
W-1105
W-1106
W-1107
W-1108
W-1109
W-1110
E-1111
E-1112
W-1113
W-1114
No. Message Action to Take